Structure Integrity & Reliability Assessment
IT Based Mechanical Design & Convergence Design
Education
(Ph.D.) Univ. of Waterloo(Canada)
Experience
Head of Steering Group for Wearable Smart Device at Ministry of Trade, Industry and Energy
Safety Committee of Nuclear Safety and Security Commission
Advisory Committee member for SAMSUNG Electronics
Advisory professor of Emart24 Convenience Research Institute
Journal Articles
(2022)
Conformal Three‑Dimensional Platinum Coating Using Rotary‑Type Atomic Layer Deposition for a Diesel Oxidation Catalyst Application.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY.
9,
6
(2022)
Thermal stress intensity factor solutions for reactor pressure vessel nozzles.
NUCLEAR ENGINEERING AND TECHNOLOGY.
54,
6
(2022)
Stiffness analysis of new spacer grid model for metal 3D additive manufacturing.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY.
36,
1
(2021)
Continuous synthesis of nickel/cobalt/manganese hydroxide microparticles in Taylor-Couette reactors.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY.
99,
(2020)
On elastic-plastic and creep fracture mechanics parameters estimates of non-idealized axial through-wall crack in pressurized pipe.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING.
189,
(2020)
Personalized Seamless 라이프스타일 케어 스마트홈 서비스디자인 연구 : 포노 사피엔스 시대를 중심으로.
한국IT서비스학회지.
19,
5
(2020)
Numerical simulation of ammonium perchlorate particles based on a population balance equation model in Taylor-Couette flow.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY.
89,
(2020)
The effect of crack length on SIF and elastic COD for elbow with circumferential through wall crack.
NUCLEAR ENGINEERING AND TECHNOLOGY.
52,
9
(2020)
Development of real-time Internet of Things motion detection platform applying non-contact sensor based on open source hardware.
INTERNATIONAL JOURNAL OF DISTRIBUTED SENSOR NETWORKS.
16,
7
(2020)
Plastic Limit Pressure Solutions for Elbows With Slant Through-Wall Cracks.
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME.
142,
5
(2020)
Development of creep elastic follow-up factor solutions for piping design of high-temperature reactor under combined primary and secondary loadings.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING.
182,
(2020)
Tabulated solutions of stress intensity factor and elastic crack opening displacement for elbow joints with practical through-wall cracks.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING.
179,
104030
(2019)
Limit load solutions for elbows with circumferential through-wall crack under the pressure-induced bending restraint effect.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING.
177,
1
(2019)
Visualization of CVD-grown graphene on Cu film using area-selective ALD for quality management.
APPLIED SURFACE SCIENCE.
496,
1
(2019)
재난약자의 스마트폰 재난정보 활용 욕구에 관한 연구 :영등포전통시장 사례 중심으로.
한국IT서비스학회지.
18,
3
(2018)
초연결사회에서 IoT 기반의 라이프로그 데이터를 활용한사용자 맞춤형 디바이스 지능형 캐릭터 개발.
한국인터넷방송통신학회 논문지.
18,
6
(2018)
Effects of work hardening models on low-cycle fatigue evaluations of coiled tubing with CT-100 steel.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY.
32,
11
(2018)
Development of user customized smart keyboard using Smart Product Design-Finite Element Analysis Process in the Internet of Things.
ISA TRANSACTIONS.
81,
(2018)
Small punch test and simulation of HR3C steel.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY.
32,
7
(2018)
Real-Time Optical Visualization of Graphene Defects and Grain Boundaries by the Thermal Oxidation of a Graphene-Coated Copper Foil.
ACS Applied Nano Materials.
1,
6
Publications
(2021)
마음방역39.
버튼북스.
Co-author
(2021)
기계설계 SI Unit.
한국맥그로힐(McGraw-Hill KOREA).
Co-author
(2020)
Change 9 : 포노 사피엔스 코드.
쌤앤파커스.
Solo
(2020)
코로나 사피엔스 : 문명의 대전환, 대한민국 대표 석학 6인이 신인류의 미래를 말한다.
인플루엔셜.
Co-author
(2019)
스마트폰이 낳은 신인류 포노사피엔스.
쌤앤파커스.
Solo
(2013)
기계설계.
한국맥그로힐.
Co-author
(2009)
2008 대한산학협력백서 (2009년도판).
한국연구재단.
Co-author
(2009)
미래의 글로벌 리더를 위하여 엔짱.
성균관대학교 출판부.
Solo
(2009)
21세기 다윈 혁명.
사이언스북스.
Co-author
(2006)
"Autodesk Inventor -Advanced Course".
도서출판 골드.
Solo
(2021)
머신러닝을 활용한 주물 공정 데이터 기반 품질 예측.
대한기계학회 CAE 및 응용역학부문 춘계학술대회.
KOREA, REPUBLIC OF
(2021)
지진하중하 원자력발전 RCS 응력 예측 머신러닝 모델 비교.
대한기계학회 CAE 및 응용역학부문 춘계학술대회.
KOREA, REPUBLIC OF
(2021)
“디지털 대전환시대, 새로운 문명 표준을 찾아라”-포노 사피엔스 시대 당신이 바꿔야할 3 가지.
2021년도 대한기계학회 플랜트부문 춘계학술강연회.
KOREA, REPUBLIC OF
(2021)
Multilayer를 활용한 MEMS Cantilever 구조물의 Solder 안정성을 위한 연구.
한국정밀공학회 학술발표대회.
KOREA, REPUBLIC OF
(2021)
지진하중 하 원자로압력용기의 머신러닝 기반 응력강도 예측모델 개발.
2021 년도 대한기계학회 신뢰성부문 춘계학술대회.
KOREA, REPUBLIC OF
(2021)
A Study on Pressure-Temperature Limit Curves for OPR-1000 Complying with New Regulations.
The 13th International Symposium on The Asian Society for Integrity of Nuclear Component.
KOREA, REPUBLIC OF
(2020)
The Pressure-Temperature Limit Curves for Inlet Nozzles of the OPR-1000 Reactor Pressure Vessel.
COMPSAFE 2020.
JAPAN
(2020)
A Study on Pressure-Temperature Limit Curve for Beltline and Outlet Nozzle According to New Regulation Requirements.
IMECE 2020.
UNITED STATES
(2020)
포노사피엔스시대 트렌드 2020.
2020 한국어린이미디어학회 정기확회.
KOREA, REPUBLIC OF
(2020)
Assessment of C*-Integral and Creep COD Rate for Welded Pipe with Strength Mismatch at High Temperature.
Asia-Pacific Conference on Fracture and Strength 2020.
KOREA, REPUBLIC OF
(2020)
냉각시 원자로압력용기 노즐부 균열의 열하중에 의한 응력확대계수식 개발.
대한기계학회 CAE 및 응용역학부문 2020년도 춘계학술대회.
KOREA, REPUBLIC OF
(2020)
최신 규제요건에 따른 원자력 압력용기 압력-온도 제한곡선에 대한 연구.
대한기계학회 CAE 및 응용역학 부문 2020년도 춘계학술대회.
KOREA, REPUBLIC OF
(2020)
Development of IoT Modularization System using Open Source Hardware.
The 17th International Conferenceon Mobile Systems and Pervasive Computing.
BELGIUM
(2020)
Development of User-Customized Intelligent Characters using the IoT Integrated Platform.
The 17th International Conference on Mobile Systems and Pervasive Computing.
BELGIUM
(2020)
다상 유동 모델에 따른 diffuser 내 공동현상 특성 분석.
대한기계학회 재료 및 파괴부문 2020 춘계학술대회.
KOREA, REPUBLIC OF
(2020)
유한요소해석을 통한 Plasma Enhanced Atomic Layer Deposition 장비 유동 가시화 연구.
대한기계학회 재료 및 파괴부문2020 춘계학술대회.
KOREA, REPUBLIC OF
(2020)
최신 규제요건을 만족하는 원자로용기 압력-온도 제한곡선 개발.
대한기계학회 재료 및 파괴부문 2020 춘계학술대회.
KOREA, REPUBLIC OF
(2020)
Seismic Data Analysis Regression Model on Reactor Pressure Vessel using Fast Fourier Transform and Machine Learning.
International Conference on Intelligent Information Technology.
VIET NAM
(2020)
DEVELOPMENT OF GTN MODEL PARAMETERS FOR SIMULATING DUCTILE FRACTURE BEHAVIOR OF X 70 CARBON STEEL SENT SPECIMENS.
2019 Pressure Vessels & Piping Conference.
UNITED STATES
Activities
(2010)
CAD 모델 경진대회.
KOREA, REPUBLIC OF,
(2009)
2009 창의적 종합설계 전국경진대회.
KOREA, REPUBLIC OF,
(2009)
2009 서울디자인 올림픽 v2 디자인 공모전.
KOREA, REPUBLIC OF,
(2009)
제 10회 한국 CAD/CAM학회 모델링 경진대회.
KOREA, REPUBLIC OF,